The
Future of Customer Service in a Modern Contact Centre
by Trevor Parnham, Director of Customer Service Solutions
Overview
Much has been written about what constitutes excellent Customer
Service. There are many theories put forward, but each depends
on the nature of the business and the type of service being offered.
Many theories have one fatal flaw - They don't take
into account what the Customer actually wants, but more what the
company
thinks they want.
Therefore the definition of Excellent Customer Service should be:
Providing a level of service which ensures that each Customer
feels that their individual needs have been completely fulfilled.
A tall order? Or is it?
Modern Contact Centres have 'evolved' from the necessity
to provide Customer Support to a large number of Customers at the
lowest possible cost. Typically telephone support was and is the
main channel by which Customers could get answers to their questions.
As the Internet became more widely available, email, chat and online
help was added, but this was seen as a vain attempt to divert Customers
from the telephone. Solutions were hurriedly introduced but all
based around the telephone support model.
Even with telephone support and less so for the other support
channels, there is little structure to the support provided. Telephone
support agents are largely left to their own devices to provide
answers to the Customers' questions. This is particularly
so with technical support.
Support agents acquire their own knowledge. Training is often
sacrificed in favour of handling more and more calls. The outcome
of this is that if a Customer speaks to four different agents,
then there is a good chance they will get four different answers
to their question. Over a period of time 'Floor law' takes
over and information is given to Customers that has not been verified
by the company. Even worse, in many cases the company is not even
aware it is happening. Is there any wonder that contact centres
have developed a reputation for poor service?
The Future of Customer
Service
1. Start with the Customer
There needs to be a structured approach to Customer Service which
is based on what the individual Customer needs. Most Customers,
given the choice would not want to wait in a telephone queue, having
had to navigate their way through confusing IVRs.
Some would prefer to find the answers to their questions online.
However, just to provide a list of links to various web pages
is not very helpful. Take a look at any online help site and
try to find the answer to a question, if it isn't the most
basic, or indeed if it is up to date. The Customer needs to be
guided to what they are looking for and if they get into difficulties;
they want to be able to ask for help.
Some would prefer to speak to a 'live' human being
online, where they can either obtain an immediate answer to their
question or be sent information, or be directed to where they
can find the information online.
Some would prefer to correspond via email, but in the knowledge
that they will get an immediate response to their question. If
this doesn't answer their question, then they need to know
where to go next.
However, there are still those Customers who do not have internet
access and so the only channel open to them is the telephone.
The first two rules of Excellent Customer Service;
Rule 1: The Customer should be able to contact the company by whichever
channel they choose.
Rule 2: Whichever channel they do choose, they should be confident
that they will obtain consistent answers to their questions.
If the second rule is not adhered to, they will go to the channel
they hope will give them this - the telephone. The most expensive
channel to support. A mistake often made by companies is that
they can 'divert' telephone calls to other channels,
but unless these channels provide what they want, they will drive
even more calls to the telephone.
2. What about the Support Agent?
I have spent the last few years working closely with telephone
support agents and the complaint I have heard consistently is
that they are not listened to. They are normally the first point
of contact for a Customer and nobody knows better than them what
the customer needs.The Customers want their questions answered
or their problems solved and they don't want to have to
call back.
What happens in practice? The agents are put under more and
more pressure to keep call times low. Consequently, they will
tailor the call to fit the time allowed, rather than ensure the
Customer is satisfied - they often have little choice.
The most difficult part of a call for an agent is diagnosing
what the reason for the call is. Particularly with technical
support, this is based on the Customer's perception of
the problem and the agent's perception of what the Customer
is saying. This often leads to wrong or incorrect diagnosis and
is a prime cause of long call times, Customer dissatisfaction
and agent frustration.
A frequent example is where a Customer says that they cannot
connect to the internet. The agent then tries to fix a connectivity
problem only to find out some twenty minutes later that there
was not a problem with connection but, a simple case of incorrect
browser settings, which would have taken two minutes to fix.
These problems equally apply to non technical calls such as
sales, product enquiries or Customer retention.
If agents have confidence this is transmitted to the Customer.
With new or inexperienced agents they need guidance in just the
same way that Customers do. They need 'coaching' as
to why they are being asked to take certain steps or ask certain
questions. Chances are the Customers will ask why and the agent
needs the confidence to be able to explain.
Rules number three and four of Excellent Customer Service:
Rule 3: Ensure that agents are provided with the tools necessary
for them to do their job effectively.
Rule 4: Provide adequate training in the use of these tools
3. Structure of a typical Customer
contact
A typical Customer contact consists of the following elements
that are common to all contacts regardless of channel:
These elements occur in the above order and a typical ten minute
call can be broken down as follows:
| Element |
Time in secs |
% of total time |
| Diagnosis |
420 |
70% |
| Resolution |
180 |
30% |
If the Customer's perception of the problem is wrong then
it is easy to see why a ten minute call can become 15, 20, 30,
minutes, or even longer and most of the additional time is spent
on diagnosis. This is even more pronounced with a new or inexperienced
agent.
If the correct diagnosis is made then the resolution time can
be predicted and controlled. After all, once a resolution is
determined, then its implementation should be consistent for
the same symptom. If the diagnosis is incorrect then both the
agent and the Customer become frustrated, the problem will probably
not be fixed and the Customer will call back.
There are many knowledge based solutions available which use
natural language search or keyword searches. In order for these
to be effective, the Root Cause has to be known. For the reasons
I have stated previously, without structured diagnosis this
becomes very hit and miss.
By using a structured approach to diagnosis the result is reduced
call times, a higher fix rate and improved Customer satisfaction.
Rules number five and six of Excellent Customer Service:
Rule 5: Ensure that diagnosis is structured and is completed
in the smallest number of steps possible.
Rule 6: Measure the effectiveness of resolutions and ensure
the most effective are applied.
4. The Knowledge Engineer or Author
To maintain an effective knowledge base trained authors, are
required. These individuals have to possess a sound knowledge
of how knowledge is structured and be able to interpret information
supplied by all stakeholders. A stakeholder can be a product
owner, subject matter experts, support agents and Customers.
These people will feed back requests for new knowledge or amendments
to additional knowledge based on user experience, new products,
a change in Company business rules, or improved processes.
They too need consideration if they are to be productive and
accurate. How they author the knowledge can have a significant
impact on how efficient they are. Long after a knowledge base
is released, these authors will be expected to keep it up to
date and supplying the information when and where it is needed.
By providing them with the correct tools for the job, will ensure
that maintenance costs are kept to a minimum.
5. The Solution
Using the rules for Effective Customer Service, Companies have
the opportunity to provide an efficient and first class service
to their customers.
Customers need to enjoy their contact with the company. This
can be facilitated by allowing them to use the channel which
suits them best. By using the same structured knowledge base
across all channels will allow this to happen.
With self-help, if they make a mistake or go down the wrong
route, they should be able to re-answer pertinent questions,
without having to start all over again. Whenever a Customer is
asked a question or asked to perform an action, they should be
able to access an explanation why.
In the case of performing actions Customers should have access
to clear, graphical tutorials to show them how to perform the
action. This should be pertinent to just the action they are
being asked to perform. They should not have to search through
documents to find out how.
If Customers hit a problem while using one of the internet channels,
they must be able to switch channels where a human being is on
hand to help. If they do switch channels or they have to make
a repeat contact, the previous contact information must be immediately
available to the agent handling the contact, so that they can
see exactly what the Customer has been trying to achieve and
carry on from where the Customer left off. The agent should be able to re-answer any of the previous questions
so that they don't have to start from the beginning.
The technology is available to make all this happen. The potential
for cost saving is enormous, while at the same time improving
Customer Service and thus Customer satisfaction.
|